8 Channel Microphone Pre-Amplifier with separate power supply
Articlecode: SMPA-508
8 Channel Microphone Pre-Amplifier with separate power supply
Technical Specifications:
Frequency response: 1.6 Hz to 580 kHz (-3dB) / 20Hz to 20KHz (-0.1dB)
THD+N: 0.0001% at 0dB gain 0.001% at 53dB gain (at +16dBu, 20Hz to 20KHz)
Equivalent input noise: 0.4µV at 53dB gain 2µV at 0dB gain (A-weight)
CMRR: >90dB at 1KHz
Slew Rate: 20V/uS
Crosstalk: >100dB at 0-10KHz
Maximum output level: 10V ,+22dBu
Output impedance: 75 Ohms
Maximum output current: 50mA
Input impedance: 5KOhm unbalanced, 10KOhm balanced
DC offset : < ±2mV
Cable drive capability: > 100m
Gain: 0 to 53 dB (0 dB, 15 dB, 30 dB +0 to 23dB in 1dB steps)
Phantom Power: 48V, 10mA
Number of channels: 8
Input: 3-pin XLR female connector (balanced, transformerless)
Output: 3-pin XLR male connector (balanced, ground compensated)
Power requirements: 105-120V and 210-240V, 50 to 60 Hz
Power consumption: 19W
Weight: 3,6 kg
Dimensions preamp:
19" rack, 1HE
433 (front 483)× 165 × 53mm
(17.04" x 6,49" x 2,08")
Dimensions power supply: 110mm× 200mm × 53mm
(4,33" x 7,87" x 2,08" )
|
